Truly hands-free convenience
With maintenance-free docking from the Saros 20, this new model features refill and drainage to take hands-free cleaning to new heights.
Auto water refill and drainage
The dock automatically refills clean water, and empties used water without any manual refilling or draining – just peace of mind after every clean.
AdaptiLift chassis 3.0
An advanced vision system, adaptive algorithms, and a main wheel + auxiliary wheel + climbing arm lifting structure allow the robot to analyze, test, and memorize the best way to cross thresholds—ensuring uninterrupted cleaning across every room.
Industry-first dynamic cleaning for up to 3 cm carpets*
Experience industry-first dynamic chassis elevation. Intelligently adjust the body height to maintain optimal suction and ensure deep cleaning performance across carpets with pile height up to 3 cm.
* This function needs to be manually enabled in the Roborock app.
Prevent getting stuck
The robot automatically elevates its chassis or independently adjusts its front, rear, left, or right sides to free itself if it gets trapped.
Slides smoothly into lower spaces
Equipped with the next-gen StarSight Autonomous System 2.0, the Saros 20 achieves a remarkably slim profile, effortlessly navigating under sofas and beds as low as 7.95 cm with advanced localization and mapping capabilities*.
*The body height of the robot vacuum is 7.98 cm. Due to slight vertical flexibility in the front structural components, the robot may achieve limited passive compression when entering low-clearance spaces, allowing access down to 7.95 cm. However, please note that scraping may occur. Actual performance may vary depending on environmental conditions.
Extends to clean toe-kick areas*
Identifies toe kick areas as low as 2 cm and extends FlexiArm Arc Side Brush to sweep hidden dust away.
* This function needs to be manually enabled in the Roborock app.
Clean beyond curtains*
Crosses marked curtains with ease—reaching hidden spaces behind for a complete clean.*
*Users should manually mark the location of the curtains on the map through the Roborock app to trigger this function. Actual results may vary depending on environmental factors.
The Next-Gen 3D sensing
Premium navigation and obstacle avoidance technology ensure precise mapping, superior coverage, and enhanced object recognition—whether it's cables, pets, or unexpected barriers.
DirTect technology - Stain-Target AI cleaning*
The robot detects stain types through its RGB camera and adapts cleaning strategies automatically—boosting suction for coffee powder, cat litter, or switching to mop-only mode for liquids waste. No mess is too tough to conquer.
* This function needs to be manually enabled in the Roborock app. Based on internal testing carried out by the manufacturer. Actual results may vary depending on environmental factors.
Liftable main brush and mops
Dynamically adjusts the chassis, main brush, and mop height based on cleaning mode—ensuring optimal contact, coverage, and performance across every surface.
• Clean carpets: Protects carpets from moisture while maximizing cleaning performance. Main brush lowered & stabilized.*
• Vacuum only: Keeps floors dry while maintaining powerful suction during vacuuming.
• Mop mode: Prevents dust recontamination during wet mopping.
Dual Anti-Tangle System
The enhanced omnidirectional wheel comes with a convenient brush that cleans the wheel as it operates, simplifying maintenance and ensuring optimal performance. No more brush maintenance with the new anti-tangle system on the main brush and side brush that expertly handles long hair and is optimized for pet-friendly environments.
200 rpm Dual Spinning Mop
When tough stains are detected, the robot automatically increases downward pressure by lifting its Omni-Wheels to press the upgraded mops harder for deeper scrubbing, better stain removal, and improved water-mark cleaning.
FlexiArm Technology
Roborock's exclusive FlexiArm Technology enables the side brush and side mop to reach into hard-to-clean crevices and along walls, delivering unmatched edge-to-edge mopping performance and full perimeter coverage.
Brand new RockDock
• 100 ℃ hot water mop washing
• 100 ℃ hot water dock self-cleaning
• Dust bag fresh-air drying
• Auto mop removal
• Smart re-wash & re-mop
• 55 ℃ warm air drying
• Warm water tank refilling
• Auto dust emptying
• Auto detergent dispenser
• 2.5-hour fast charge
100℃ hot water mop washing
Using up to 100°C hot water, RockDock helps loosen stubborn dirt, food residue, and greasy stains from the mop pads. With every wash, mops are refreshed more effectively—supporting a more thorough and hygienic floor clean.
New cleaning tray with new soaking mode*
The upgraded one-piece cleaning tray increases mop coverage and water capacity for deeper washing, quieter cycles, and self-cleaning maintenance—no disassembly needed.
*This function needs to be manually enabled in the Roborock app.
Automatic mop detachment
Transition seamlessly from hard floors to carpets with an auto-detaching mop. When vacuum-only or carpet-first modes are activated, the mop is intelligently detached to avoid moisture transfer and keep carpets dry, fluffy, and fresh.
100°C hot water dock self-cleanin
The dock base stays hygienic with up to 100°C hot water and the self-cleaning module, reducing manual maintenance.
Intelligent dirt detection for re-washing & re-mopping
Dirt levels are continuously monitored during mop washing, adjusting the wash duration and triggering an extra mopping pass for areas with more dirt.
55°C warm air drying
Dries the mops and dock base thoroughly with 55°C of warm air, preventing the growth of mold and unpleasant odors.
Warm water auto-refilling
Automatically refills the robot's water tank with warm water when needed.
Auto dust emptying
Provides up to 65 days without manual emptying.
Fresh-air dust bag drying
Ambient airflow dries residual moisture in the dust bag, reducing odors and keeping the dock fresh.
2.5-hour fast charging
Save time with 2.5-hour fast charging, now over 40% faster than before.
Detachable dock base
Fully detachable dock base for easier washing when needed.
Smart strategy for every carpet
Want to deep clean carpets or skip them entirely? One tap is all it takes. Your robot adapts automatically—boosting suction on carpets with the mop lifted, or following precise edge-cleaning paths to avoid rugs and keep them dry*.
You're in control of every room, every rug, every time.
*These carpet cleaning settings must be manually enabled and selected in the Roborock app.
Roborock SmartPlan 3.0
Roborock SmartPlan 3.0 automatically recognizes room types, learns your cleaning habits, and selects the optimal cleaning strategy for you—boosting suction when needed, rewashing the mop as required, and lowering power to reduce noise during Do-Not-Disturb periods.
Pet-friendly intelligence
• Automatic pet recognition: When approaching your pet, the robot automatically pauses its main brush and adjusts its path to avoid startling it.
• Pet snaps: When enabled, your robot automatically takes adorable photos of your pets during cleaning sessions — ready to view, save, and share with just one tap.
• Track your pet: Keep track of your furry friends as the robot navigates your home. Their locations are marked on the map—no more losing them in a game of hide-and-seek.
• Video call & cruise: Check in on your pets or home in real time, and remotely guide your robot to any spot for a closer look.
Your privacy, Roborock's top priority
Roborock upholds the highest global data privacy standards, ensuring your personal information stays safe at all times.
Check your environment
Please confirm the dock position and water pipe connections in advance to ensure compliance with the following installation requirements:
1. Maintain a space of approximately 30.5 cm in height, 40cm in width, and 120 cm in depth.
2. Position the dock on a hard and even floor (wood, tile, concrete, etc.), flush against a wall. Avoid placing it on soft surfaces (carpet, mat, etc.) and in narrow areas.
3. Ensure that the location has a strong Wi-Fi signal for an optimal experience with the mobile app.
4. The height difference at any point on the drainage pipeline from the ground is recommended not to exceed 50 cm.
5. The installation distance for the water refill and outlet pipes is recommended within 6 meters. If this is not possible, please contact customer service for consultation.
6. The water pressure range is 0.1-0.4MPa. If it exceeds 0.4MPa, please use a pressure-reducing valve.
7. The pipeline layout should avoid passing through room doorways to prevent accidental breakage due to household traffic.
8. Ensure there are no thresholds, tracks, or steps higher than 2 cm between the dock's installation site and the cleaning area to avoid the risk of getting stuck or missed cleaning.
9. Before installation, please disconnect the power supply of the dock. Turn off the main water supply switch, faucet switch, or angle valve switch in the house. Drain any remaining water from the pipes, and ensure they are connected without leakage before powering on.